Setting up Your Linksys Extender by using the web address “httpextender.linksys.com” is a very easy, simple, and hassle-free process. You just have to follow a few basic steps. Start by unboxing your Linksys Extender and accumulate all the components that you received in the box and an ethernet cable if needed.
Prerequisites For the Linksys Extender Setup Process
Before you begin with the setup there are certain essential pre-requisites that you would need, which are as follows:
- Your Linksys Extender
- An electronic device such as a Computer, Laptop, Tablet, or a Smartphone
- And last but not least is A Wi-Fi Network with its name and password.
Linksys Extender Setup Process (Step-By-Step Guide)
Here is the step-by-step guide to set up the Linksys Extender via http/extender.linksys.com:
Logging Into Linksys Extender
- Firstly, Plug in the Linksys Extender into an electric switchboard and allow it to power on. Please make sure that the extender is neither too close nor too far from your Wi-Fi router. You will notice a solid green light, which is a signal that your Linksys Extender is powered on. Please note that it may take one or two minutes for the device to initialize.
- The second step is to visit your Wi-Fi settings and search for ‘Linksys Extender Setup’ or something similar in the list of available Wi-Fi networks on your device. Once you find it, connect to this network.
- After that open your web browser and go to the URL http://extender.linksys.com. Once you open the URL, you will see a login page for the setting up of your Linksys Extender. If in any case, http://extender.linksys.com does not work you can also type the default IP address which is http://192.168.1.1. Now you just have to fill up the login details. You can find your login information on the user manual or on the documentation that you received with your Linksys Extender. Although the default credentials are usually “admin” for both username and password sometimes these credentials can vary, so it is always better to check it in the user manual.
Setting Up the Device
Here are the setup steps that you need to follow once you complete the Linksys Extender Login process
- Once you log in, through http/extender.linksys.com, an extender set-up page will appear which will guide you through the process. You just have to follow the steps which usually start by choosing the Wi-Fi network that you like to extend and entering the Wi-Fi password. It can also ask your preference language and you may also be asked to agree to certain terms and conditions.
- You can also change the name and password of the extended network for easy identification of the extender network. Once you do this save the changes that you made and the extender will save the new settings.
- When the Configuration is done, restart your Linksys Extender and reconnect your devices to the newly extended Wi-Fi network which was done through http/extender.linksys.com
These were the few steps that you had to follow to set up your Linksys Extender by using extender.linksys.com. After you are done with the set-up you will notice a much better and stronger Wi-Fi signal that was earlier being a speed breaker in your smooth ride.
We hope this helped. If yes, Congratulations, you have pulled out all the Wi-Fi dead zone areas from your zone and extended your network coverage with your Linksys Extenders.
Major Differences You May Notice After Setup
The major differences you may notice after setting up your Linksys extender through http/extender.linksys.com would be:
- You will see a strong and stable connection in every corner of your home or office, all the dead zones will now be alive with fantastic Wi-Fi signals.
- You will notice a consistent connection network.
- Now, you will not see the signal drop-off at any step that you take up at your place.
- With Linksys Extenders you will see increased network capacity. You can use multiple devices without facing any obstacles of a weak Wi-Fi network. Thus, relieved from buffering.
- Major improvement in gaming and streaming experiences.
- Linksys Extenders are compatible with routers of every brand. Thus, they are cost-effective.
- Linksys Extender also provides you with the facility of creating a guest network which comes in handy when guests come over without giving them access to your main network. Thus add on privacy.
Thus, setting up Linksys Extenders through http/extender.linksys.com not only extends your network and kills zones but also provides you with ample features that enhance user experience.
If you still face any difficulty during the set-up of your Linksys Extender via extender.linksys.com, you can always check the user manual for detailed information or you can also visit the Linksys support website i.e. www.linksys.com. Feel free to contact us, our team will provide you with the best of services in the minimum required period.
